Lawn & Garden Equipment
Lawn Aerator Rental in Arlington, TX
Family owned since 1959 · 1010 W. Division St., Arlington, TX 76012
Quick Answer
Moore Rental Service rents a walk-behind lawn aerator in Arlington, TX for $45 per two hours, $65 per four hours, $110 per day, or $420 per week. A typical quarter-acre yard aerates in two to three hours. Call (817) 277-1141 to reserve.
- Lawn Aerator
- $110 / day • $45 for 2 hours
- Typical Quarter-Acre Yard
- 2–3 hours
- Best Timing (Bermuda/St. Aug)
- Late spring through summer
- Also Available
- Dethatcher • verti-cut comber • lawn roller
A walk-behind core aerator built for North Texas clay — the single most effective thing you can do for a compacted Bermuda or St. Augustine lawn. Dethatchers, verti-cut combers and lawn rollers available the same day.
Why North Texas Lawns Need Aeration More Than Most
The soil across Arlington, Grand Prairie, Mansfield and most of Tarrant County is heavy expansive clay. Clay compacts under foot traffic, mower weight, kids, dogs and its own seasonal swelling and shrinking, and compacted clay is close to airtight. Water sheets off it instead of soaking in, fertilizer runs to the street, and grass roots stay shallow because there is nowhere for them to go.
A core aerator punches hollow tines into the soil and pulls out finger-sized plugs, leaving thousands of open channels. Air, water, fertilizer and root mass move into those channels immediately. Within a few weeks the turf greens up noticeably, and by the end of a season the root system is measurably deeper — which is what actually carries a lawn through a 105-degree August.
Core aeration is genuinely different from a spike aerator or aerator sandals, which simply push soil aside and make compaction slightly worse. Pulling a plug out is the whole mechanism.
When to Aerate in the DFW Climate
Time it to your grass type — aerating during dormancy stresses the lawn without any recovery benefit:
- Bermuda and Zoysia (warm-season): late spring through mid-summer, once the lawn is fully green and actively growing. Late April through July is the sweet spot in Tarrant County.
- St. Augustine: late spring into early summer, when it is growing hard and can knit the plug holes closed quickly.
- Fescue and other cool-season grass: early fall. Aeration paired with overseeding in September or October is the single best combination for a thin fescue lawn.
Water the day before. Aerating bone-dry North Texas clay is nearly pointless — the tines bounce and barely penetrate. Aerating a soggy lawn is equally bad, because the machine smears and rips. You want soil that is moist a couple of inches down, which usually means a good watering the previous evening.
How to Run the Job
- Flag everything. Sprinkler heads, valve boxes, shallow irrigation lines, invisible-fence wire and low-voltage landscape lighting all get destroyed by aerator tines. Mark them with flags before you start — this is the step people skip and regret.
- Mow slightly low and clear the yard of sticks, toys and hoses.
- Make two passes in a crosshatch pattern for a compacted lawn. One pass is a light maintenance aeration; two perpendicular passes is what a hard clay yard actually needs.
- Leave the plugs. Do not rake them up. They break down in a couple of weeks of mowing and rain, and returning that soil and thatch to the surface is part of the benefit.
- Fertilize and water immediately after. The open channels are the reason you did this — put nutrients and water into them while they are open. Overseed now too, if that is part of the plan.
A quarter-acre yard usually takes two to three hours including setup and gate wrangling, which is why the two- and four-hour rate blocks are the most popular for this machine. Larger lots and crosshatch passes push into the daily rate.
Aerator, Dethatcher or Verti-Cut?
These three machines get confused constantly, and they solve different problems:
- Aerator — pulls soil plugs. Fixes compaction. This is the one most DFW lawns need annually.
- Lawn comber / dethatcher — spring tines rake out the dead spongy layer between the green blades and the soil. Fixes thatch buildup, common in heavily fertilized Bermuda and St. Augustine.
- Verti-cut comber — vertical blades slice into the turf and soil, more aggressive than a dethatcher. Used to prep a lawn for overseeding or to cut through a heavy mat of runners.
Both combers rent for $40 for two hours, $60 for four hours, $80 per day or $320 per week. If your lawn is both compacted and thatchy, dethatch first, then aerate, then fertilize and water.
Equipment & Rental Rates
| Equipment | 4 Hour | Daily | Weekly |
|---|---|---|---|
LAWN AERATOR
|
$65.00 | $110.00 | $420.00 |
LAWN COMBER {DETHATCHER}
|
$60.00 | $80.00 | $320.00 |
LAWN COMBER {VERTI-CUT}
|
$60.00 | $80.00 | $320.00 |
LAWN ROLLER
|
$15.00 | $25.00 | $75.00 |
LAWN SOD CUTTER
|
$70.00 | $100.00 | $380.00 |
Rates shown are from the Moore Rental Service catalog and are subject to change. Tax, damage waiver and delivery are not included. Call (817) 277-1141 to confirm current pricing and availability.
Where We Rent: Arlington and the Surrounding DFW Cities
Moore Rental Service has operated from 1010 W. Division St., Arlington, TX 76012 as a family-owned business since 1959. Customers pick up equipment here and put it to work across Arlington, Mansfield, Grand Prairie, Hurst, Euless, Bedford, North Richland Hills and Fort Worth, along with the surrounding Dallas / Fort Worth Metroplex.
- Arlington, TX
- Mansfield, TX
- Grand Prairie, TX
- Hurst, TX
- Euless, TX
- Bedford, TX
- North Richland Hills, TX
- Fort Worth, TX
Store Hours
How Renting From Moore Rental Service Works
Call and Reserve
Tell us what the job is, not just what machine you think you need. Call (817) 277-1141 and we will confirm availability and hold the equipment for your date.
Pick Up or Have It Delivered
Come by 1010 W. Division St. in Arlington, or ask about delivery. Every renter gets a full walkthrough of the controls, safe operation and shutdown before leaving.
Get the Job Done
Rent by the two-hour block, four-hour block, day or week, whichever fits the work. Questions mid-job? Call us — we would rather answer than have you guess.
Bring It Back
Return the equipment during store hours and you are done. No membership, no subscription, no long-term commitment.
Lawn Aerator Rental — Frequently Asked Questions
How much does it cost to rent a lawn aerator in Arlington, TX?
Moore Rental Service rents a walk-behind lawn aerator for $45 for two hours, $65 for four hours, $110 per day, or $420 per week. Most homeowners finish a standard yard inside the two- or four-hour block. Prices are subject to change and exclude tax — call (817) 277-1141 to confirm.
When is the best time to aerate a lawn in the Dallas–Fort Worth area?
Aerate warm-season grasses — Bermuda, Zoysia and St. Augustine — in late spring through mid-summer once the lawn is fully green and growing, roughly late April through July in Tarrant County. Aerate cool-season fescue in early fall, ideally paired with overseeding. Never aerate a dormant lawn; it takes the stress without getting the recovery.
How long does it take to aerate a typical yard?
A quarter-acre yard generally takes two to three hours including setup, gates and cleanup. Doubling that with a second crosshatch pass — which heavily compacted North Texas clay usually needs — pushes the job toward a half day. Larger lots run into the daily rate.
Should I water my lawn before aerating?
Yes. Water thoroughly the day before. Aerator tines will not penetrate dry, hard clay and simply bounce across the surface. Soil that is moist a couple of inches down pulls clean plugs. Avoid aerating when the ground is saturated, though — the machine smears and tears wet turf instead of coring it.
Do I need to rake up the soil plugs afterward?
No, leave them. The plugs break down within a couple of weeks under normal mowing and rain, returning soil and organic matter to the surface. That breakdown is part of the benefit. Fertilize and water right after aerating so the nutrients travel down the open channels while they are still open.
Will the aerator damage my sprinkler heads or irrigation lines?
It absolutely can. Flag every sprinkler head, valve box, shallow irrigation line, invisible-fence wire and low-voltage lighting run before you start. This is the most common and most expensive mistake homeowners make with a rented aerator, and marking takes fifteen minutes.
What is the difference between an aerator and a dethatcher?
An aerator pulls hollow plugs of soil to relieve compaction. A dethatcher (lawn comber) uses spring tines to rake out the dead spongy layer sitting between the grass blades and the soil. They fix different problems. If your lawn has both, dethatch first, then aerate, then fertilize and water.
Can I fit a lawn aerator through my backyard gate?
Most walk-behind aerators clear a standard residential gate, but measure your narrowest opening before renting and check for steps or steep slopes on the route. Call (817) 277-1141 with the measurement and the staff at the Arlington store can confirm clearance before you make the trip.
Related Rentals
Ready to Reserve?
Call Moore Rental Service and talk to someone who knows the equipment. We have been renting to homeowners and contractors across Arlington and the DFW Metroplex since 1959 — tell us about the job and we will make sure you leave with the right machine.
Equipment Rental by City
Everything Moore Rental Service stocks, listed for each city in the Dallas / Fort Worth service area.
- Equipment Rental in Arlington, TX
- Equipment Rental in Fort Worth, TX
- Equipment Rental in Grand Prairie, TX
- Equipment Rental in Irving, TX
- Equipment Rental in Mansfield, TX
- Equipment Rental in Hurst, TX
- Equipment Rental in Euless, TX
- Equipment Rental in Bedford, TX
- Equipment Rental in North Richland Hills, TX
- Equipment Rental in Keller, TX
- Equipment Rental in Burleson, TX
- Equipment Rental in Grapevine, TX
- Equipment Rental in Haltom City, TX